Weber Rend

Monocouche Renders – Monopral Cemrend, Lithopral & Renderpral

Traditional rendering suffers from inherent problems due to modern Construction Practices. Apart from differing sand/cement mixes; hollowing, shrinkage and crazing are liable to occur as insufficient time is allowed between the application of coats. Two coats of masonry paint are then applied affecting the renders ability to ‘breathe’. This traditional method of Rendering and Decoration entails a tradesman visiting the same area on 4 separate occasions (minimum), costly in time and manpower.

Now the same finished article can be achieved with only one visit.

Over the years Weber & Brutin have developed a single product to satisfy all these requirements - "Monocouche”. Monocouche Renders represent a single product that is weatherproof and through coloured. Carefully selected colours and aggregates make up the range of Monocouche Renders that produce a decorative finish that will mature naturally and blend with its surroundings, giving years of trouble free service requiring minimal maintenance.

Finishes: Scraped, scraped with ashlar joints, stone or textured.

Colours: Available in nearly 300 shades of colour.

Application: Spray applied Monocouche Renders offer the most highly efficient and cost effective method of rendering large and modest areas. Smaller areas may be hand applied.

Advantages: Reductions in labour and time, allowing scaffold to be dismantled and ground works to begin earlier in the programme. Monocouche Renders offer real cost benefits over traditional methods.

Certification: Certificate of Assessment in the UK by BBA or WIMLAS, both accepted by the NHBC and Building Regulations. Monocouche Renders comply or have been tested in accordance with the recommendations set by British Standards.

Technical service: Weber & Broutin's team of highly trained representatives are available to give guidance on matters relating to Monocouche Renders. Each new project receives its unique specification.

Monopral Cemrend is ideal for most masonry and concrete substrates and offers the user the opportunity to select from a wide range of available finishes.

Monopral Cemrend is formulated to take full advantage of the short application programme achievable with one coat renders and, subject to weather conditions, can be applied and scraped in a single day.

Monopral Cemrend is usually pump applied using a spray rendering machine in one pass depending on the condition and construction of the substrate and degree of protection required.

Monopral Cemrend is also suitable for manual application (scraped and stone finishes only).

Monopral Cemrend provides an economic exterior finish for all types of building.

Monocouche Cemrend provides architects and building designers the opportunity to create original solutions for the individual project. Monocouche Renders are virtually maintenance free and guaranteed by the manufacturer.